Making/Answering Calls
Using the base unit
1 {SP-PHONE}
2 Speak into the MIC.
3 When you finish talking, press {SP- PHONE}.
Adjusting the ringer volume
Press {^} or {V} repeatedly to select the desired volume when in standby mode.
LTo turn the ringer off, press and hold {V} until the unit beeps.
LTo stop ringing, press {0}.
Setting the ringer tone
There are 3 tones and 3 melodies.
1 Press {^} or {V}.
2 Within 10 seconds, press {<} or {>} repeatedly to select the desired tone.
LTo stop ringing, press {0}.
Note:
LIf you subscribe to a distinctive ring service (such as
LIf you select a melody for the base unit’s ringer tone, the ringer continues to sound for several seconds if:
–the caller hangs up before you answer the call.
–another person answers the call using another phone connected to the same line.
Useful features during a call
HOLD button
This feature allows you to put an outside call on hold.
Handset
1 Press {HOLD} during an outside call.
LTo transfer the call to the base unit or another handset, continue from step 2, “Transferring calls”, page 57.
2 Press {HOLD} again.
LTo release the hold, press {C}.
LThe base unit user can take the call by pressing
LAnother handset user can take the call by pressing {C}.
Base unit
Press {HOLD} during an outside call.
LTo release the hold, press {SP- PHONE}.
LHandset users can take the call by pressing {C}.
Note for handset and base unit:
LWhile an outside call is on hold, the IN USE indicator on the base unit flashes.
LIf another phone is connected to the same line (page 14), you can also take the call by lifting its handset.
LIf a call is kept on hold for more than 9 minutes, an alarm tone starts to sound. After 1 additional minute on hold, the call is disconnected.
26For assistance, please visit http://www.panasonic.com/phonehelp
