System Settings
157
ReadyNAS OS 6.0
3. (Optional) To determine if you configured the contact information correctly, click the Send
Test Message button.
4. Click the Apply button under the Alerts heading.
Your changes are saved.
Alert Event Settings
The ReadyNAS is preconfigured to generate email alert messages when system events
occur. You can determine which optional system events generate alerts. NETGEAR
recommends that you keep all alerts enabled. However, if you are aware of a problem, you
can disable an alert temporarily.
To manage alert event settings:
1. Select System > Settings > Alerts.
2. In the Alert Events section, select the check box next to each event that you want to trigger
an alert.
If you do not want an event to trigger an alert, clear its check box.
Dimmed events (Disk Failure, Volume, Power, and UPS) always trigger email alerts.
3. In the Other Alert Settings section, select the check box next to each response that you want
ReadyNAS system to execute in case of emergency.
•Shut down the system when a disk fails or no longer responds. When this check
box is selected, if a disk fails, your ReadyNAS system powers off.
•Shut down the system when disk temperature exceeds safe levels. When this
check box is selected, if disk temperature exceeds safe levels, your ReadyNAS
system powers off.
4. Click the Apply button under the Alerts heading.
Your changes are saved.