Shared Folders
49
ReadyNAS OS 6.0
5. Click one of the file-sharing protocol buttons:
•SMB
•NFS
•AFP
•FTP
•RSYNC
•HTTP
The screen adjusts to display the access properties for the selected protocol.
6. Configure the network access settings for the selected protocol.
For more information, see the following sections (not all sections apply to all protocols):
•Configure User and Group Settings on page 50.
•Configure Host Settings on page 52.
•Configure Rsync Credentials on page 53.
•Manage Access to Remote Shared Folders on page 54
•Hide a Shared Folder on page 56.
7. Set the On-Off slider for the selected protocol:
•To enable the protocol for the selected folder , set the On-Off slider so the slider shows
the On position.
The indicator on the protocol button turns green.
Note: When you enable a file-sharing protocol for an individual shared folder,
the protocol is also enabled globally. For more information about global
settings, see Configure Global Settings for File-Sharing Protocols on page 179.
•To save the configured access settings but prevent them from taking effect, set the
On-Off slider so the slider shows the Off position.
The indicator on the protocol button turns gray.
Note: When you disable a file-sharing protocol for an individual shared folder,
the protocol remains enabled globally so that you can still access other folders
that might be using the protocol. For more information about global settings,
see Configure Global Settings for File-Sharing Protocols on page 179.
8. Click Apply.
9. Click OK.
Your changes are saved and the pop-up screen closes.