System Maintenance
199
ReadyNAS OS 6.0
•Update. Select how often the information in the graphic is updated. You can select from
30 seconds to 5 minutes.
Network The Network throughput graphic shows the network usage for Tx and Rx traffic in bytes per
second.
The range is flexible and depends on your selections from the drop-down lists above the
graphic. For example, the range can be 0 to 60 bytes or from 0 to 40 KB. The upper part of
the graphic indicates the incoming (Rx) traffic; the lower part of the graphic indicates the
outgoing (Tx) traffic.
From the drop-down lists above the graphic, you can adjust the following settings:
•Network. Select all network interfaces, individual interfaces, or individual bonds.
•Protocol. Select all protocols or individual protocols (SMB, NFS, AFP, HTTP, HTTPS,
SSH, iSCSI, or SMTP).
•Period. Select the period over which the network usage is measured. You can select
from 5 minutes to 1 year.
•Update. Select how often the information in the table is updated. You can select from 30
seconds to 5 minutes.