System Settings
164
ReadyNAS OS 6.0
4. On the General tab, configure the settings as explained in the following table:
Item Description
Name Cannot be edited. Displays the name of the Ethernet interface.
Bandwidth Cannot be edited. Displays the bandwidth of the Ethernet interface.
MTU Enter the MTU in bytes. The default setting is 1500 bytes.
VLAN ID Enter a VLAN ID. The default setting ID is 0.
5. Click the TCP/IP tab.
6. Configure the TCP/IP settings as explained in the following table:
Note: NETGEAR recommends that you use DHCP address reservation to
make sure that the DHCP server always assigns the same IP address to the
interfaces of the ReadyNAS. The MAC addresses of the physical interfaces are
shown on the Network screen.
Note: If you use VLAN ID s, the switch to which you connect the ReadyNAS system
needs to support VLAN tagging.