Shared Folders
50
ReadyNAS OS 6.0
Configure User and Group Settings
For SMB, AFP, FTP, and HTTP , you can config ure access rights to an individ ual shared folder
for users and groups. User and group settings do not apply to NFS and Rsync.
To configure user and group network access settings:
1. On the folder settings pop-up screen, select the Access tab.
2. Select one of the file-sharing protocol buttons:
•SMB
•AFP
•FTP
•HTTP
The screen adjusts to display the access properties for the selected protocol.
3. Select the Security tab on the left side of the pop-up screen.
4. From the drop-down list, make one of the following selections to specify the information that
you want to view:
•All. The default group Everyone and all groups that you configured on the local
database or that were downloaded from the Active Directory server are displayed.
This is the default setting.
•Users. Only the individual users that you configured on the local database or that
were downloaded from the Active Directory server are displayed.
•Groups. Only the groups that you configured on the local database or that were
downloaded from the Active Directory server are displayed.
For information about using the local database or an Active Directory, see User and
Group Management Modes on page 137.