NETGEAR 104, 312, 314

ReadyNAS OS 6.0

You can continue to use your ReadyNAS system while the volume is resyncing.

Resyncing can take several hours. The start and comp letion of t he resyncin g process i s

recorded in the system log (see System Logs on page 201).

If you set up email notifications for your system, you receive an email message when the

process finishes. For more information about alert notifications, see Configure System

Alerts on page 155.

3. Repeat step 1-step 2 until you have replaced the required number of disks with

larger-capacity disks.

For more information about X-RAID2 vertical expansion requirements, see Tabl e 2 on

page 30.

To vertically expand a Flex-RAID volume:

1. Replace one disk in the volume with a larger-capacity disk.

For more information about how to add a disk to your system, see the hardware manual

for your system, which is available at

http://support.netgear.com/product/ReadyNAS-OS6.

Note: You must use supported disks in your ReadyNAS system. For a list

of supported disks, visit http://www.netgear.com/readynas-hcl.

2. Wait for the volume to resync your data.