Hardware Manual for the Model CG814WG Wireless Cable Modem Gateway
Table | LED Descriptions | |||
|
|
|
|
|
Test | On | A system failure has occurred. Reboot the gateway. | ||
|
|
| Off | Normal operation. |
|
|
|
|
|
Cable Link | On (Green) | Configuration of the cable interface by your cable service provider | ||
|
|
|
| is complete. |
|
|
| Off | Configuration of the cable interface is still in progress. |
|
|
|
|
|
Cable | On | Data is being received from the network to the gateway on the | ||
Downstream |
| cable interface. | ||
Traffic | Off | The cable interface is idle. | ||
|
|
|
|
|
Cable | On | Data is being transmitted from the gateway to the network on the | ||
Upstream |
| cable interface. | ||
Traffic | Off | The cable interface is idle. | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wireless | On | Indicates that the wireless Access Point is operating normally. | ||
|
|
| Blink | Data is being transmitted or received on the wireless interface. |
|
|
|
|
|
Local | On (Green) | The Local port has detected link with a 100 Mbps device. | ||
(Local Area | Blink (Green) | Data is being transmitted or received at 100 Mbps. | ||
Network) | On (Yellow) | The Local port has detected link with a 10 Mbps device. | ||
|
|
| Blink (Yellow) | Data is being transmitted or received at 10 Mbps. |
|
|
| Off | No link is detected on this port. |
|
|
|
|
|
USB | On (Green) | The Local port has detected link with a USB device. | ||
|
|
| Blink (Green) | Data is being transmitted or received through USB. |
|
|
| Off | No link is detected on the USB port. |
|
|
|
|
|
Hardware Overview |
