NETGEAR manual Basic Installation Instructions, For Windows XP Users Installing a CG814WG

Hardware Manual for the Model CG814WG Wireless Cable Modem Gateway

Basic Installation Instructions

Use the procedure below that corresponds to the version of Windows you are using.

For Windows XP Users Installing a CG814WG

Install the CG814WG driver and configuration utility software.

a.Power on your notebook, let the operating system boot up completely, and log in as needed.

b.Insert the Resource CD for the CG814WG into your CD-ROM drive. The CD main page shown at the right will load.

c.Click the “Install Driver & Utility” link.

d.Follow the Install Shield Wizard steps, and click Finish when done to restart your computer.

CG814WG Resource CD

Note: If this page does not automatically appear, browse the root of the CD and double-click on INDEX.HTM to display this page.

Install Shield Wizard

Note: If a Windows XP Certification warning appears, click Continue Anyway to proceed.

C-4 Configuring Wireless Security in Windows XP