Reference Manual for the Model DG814 DSL Modem Internet Gateway

A typical installation is shown in Figure 2-3, below

Figure 2-3. Typical installation

Connecting to your Local Ethernet Network

Your local network (LAN) will attach to the four Local gateway ports shown in Figure 2-2. The Local ports operate at either 10 Mbps (10BASE-T) or 100 Mbps (100BASE-Tx), depending on the Ethernet interface of the attached PC, hub, or switch. For any connection which will operate at 100 Mbps, you must use a Category 5 (Cat 5) rated Ethernet cable, such as the cable included with the gateway.

Setting Up the Hardware

2-5

Page 27
Image 27
NETGEAR DG814 DSL manual Connecting to your Local Ethernet Network, Typical installation