NETGEAR manual Reference Manual for the Model DG814 DSL Modem Internet Gateway, Maintenance

		Reference Manual for the Model DG814 DSL Modem Internet Gateway
Table 6-1.	Menu 3.2 - System Status Fields
Field			Description
DHCP			If set to None, the gateway is configured to use a fixed IP address on the
			WAN.
			If set to Client, the gateway is configured to obtain an IP address
			dynamically from the ISP.
LAN Port			These IP parameters apply to the Local (WAN) port of the gateway.
IP Address			This field displays the IP address being used by the Local (LAN) port of
			the gateway. The default is 192.168.0.1
IP Subnet Mask			This field displays the IP Subnet Mask being used by the Local (LAN)
			port of the gateway. The default is 255.255.255.0
DHCP			If set to None, the gateway will not assign IP addresses to local PCs on
			the LAN.
			If set to Server, the gateway is configured to assign IP addresses to local
			PCs on the LAN.
Modem			These parameters apply to the ADSL modem section of the gateway.
ADSL Firmware Version			This field displays the ADSL chipset firmware version.
Modem Status			This field displays the state of the ADSL connection to your service
			provider, either “Connecting” or “Connected”
Connect Mode			This field displays the protocol used to connect to your service provider.
			When the ADSL link comes up, the connection will be either “Fast” or
			“Interleaved”, depending on the way the telephone company has
			configured its equipment
Down Stream			This field displays the connection rate from the service provider to the
			gateway in bits per second
Up Stream			This field displays the connection rate from the gateway to the service
			provider in bits per second
VPI			This field displays the VPI entered in the Setup Wizard or Basic Settings
			screen
VCI			This field displays the VCI entered in the Setup Wizard or Basic Settings
			screen

Maintenance 6-3