RangeMax
3.Select your time zone. This setting is used for the blocking schedule according to your local time zone and for
Select the Adjust for Daylight Savings Time check box if your time zone is currently in daylight savings time.
Note: If your region uses daylight savings time, you must manually select Adjust for Daylight Savings Time on the first day of daylight savings time, and clear it at the end. Enabling daylight savings time causes one hour to be added to the standard time.
4.The modem router has a list of NETGEAR NTP servers. If you would prefer to use a particular NTP server as the primary server, select the Use this NTP Server check box, and enter its IP address.
5.Click Apply to save your settings.
Scheduling Firewall Services
If you enabled services blocking in the Block Services screen or port forwarding in the Ports screen, you can set up a schedule for when blocking occurs or when access is not restricted.
1.Log in to the modem router at its default LAN address of http://192.168.0.1 with its default user name of admin and default password of password, or using whatever password and LAN address you have chosen for the modem router.
2.Select Schedule below Security to display the Schedule screen that is shown in Figure
3.To block Internet services based on a schedule, select Every Day or select one or more days. If you want to limit access completely for the selected days, select All Day. Otherwise, to limit access during certain times for the selected days, or enter times in the Start Time and End Time fields.
Note: Enter the values in
4.Click Apply to save your changes.
Protecting Your Network |
