RangeMax
2.In the Wireless Settings screen, under the Wireless Station Access List section, click the Setup Access List button. The Wireless Station Access List screen displays:
Figure
3.Select the Turn Access Control On check box to enable the restricting of wireless computers by their MAC addresses.
4.Specify which wireless computers you want to allow to access your wireless network.
•If a computer is connected to the network, you can select it from the Available Wireless Stations list.
•You can copy and paste the MAC addresses from the modem router’s Attached Devices screen into the MAC Address field of this screen. To do this, configure each wireless computer to obtain a wireless link to the modem router. The computer should then appear in the Attached Devices screen.
•If the computer is not connected, you can type in its MAC address. The MAC address is usually printed on the wireless device, or it might appear in the modem router’s DHCP table. The MAC address is 12 hexadecimal digits.
Configuring Your Wireless Network and Security Settings |
