![](/images/new-backgrounds/1259079/259079143x1.webp)
RangeMax
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The modem router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The modem router’s default LAN IP configuration is:
•LAN IP address: 192.168.0.1
•Subnet mask: 255.255.255.0
These addresses are part of the designated private address range for use in private networks and should be suitable for most applications. If your network has a requirement to use a different IP addressing scheme, you can make those changes in the LAN Setup screen.
To configure LAN settings, log in to the modem router, and under the Advanced heading, select LAN Setup. The following screen displays:
Figure
If you make changes you must click Apply in order for the changes to take effect.
Note: If you change the LAN IP address of the modem router while connected through your Internet browser, you will be disconnected. You must then open a new connection to the new IP address and log in again.
Advanced Configuration |