NETGEAR DM111P manual Chapter Introduction, About the Modem, Key Features

Chapter 1

Introduction

This chapter describes the features of the NETGEAR DM111P ADSL2+ Ethernet Modem, the packaging list, and describes the connectors, LEDs, and pushbuttons on the front and rear panels. .

Note: If you are unfamiliar with networking and routing, refer to “Internet Networking and TCP/IP Addressing:” in Appendix B to become more familiar with the terms and procedures used in this manual.

About the Modem

The modem provides an always-on Internet connection for home and office networks. The 24- Mbps downstream and 1.5-Mbps upstream throughput delivers true broadband performance. The modem is ideal for seting up your network with related NETGEAR routers, such as the 108 Mbps Wireless Firewall Router (GT624) or the 54 Mbps Wireless Router (WGR614).

Key Features

The ADSL2+ Modem provides the following features:

•Supports the full range of Asynchronous Digital Subscriber Line (ADSL) standards

•Easy, Web-based setup for installation and management

•Extensive Internet protocol support

•10/100 Mbps auto sensing and Auto Uplink™ (Auto MDI-X feature that eliminates the need for crossover cables) LAN Ethernet connections

These features are discussed below.

Introduction 1-1

v1.1, September 2006