Reference Manual for the ProSafe VPN Firewall FVS318v3
Maintenance 7-5
January 2005
WAN Status action buttons are described in the table below:

Viewing a List of Attached Devices

The Attach ed Dev ic es me nu co nta i n s a tab l e of a ll IP devices that the firewall has discovered on
the local network. From the main menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 7-4: Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the firewall is rebooted, the table data is lost until the firewall
rediscovers the devices. To force the firewall to look for attached devices, click the Refresh
button.

Upgrading the Firewall Software

Table 7-2. Connection Status action buttons
Field Description
Set Interval Enter a time and click the button to set the polling frequency.
Stop Click the Stop button to freeze the polling information.
Note: The FVS318v3 firmware is not backward compatible with earlier versions of the
FVS318 firewall.