NETGEAR FVS318v3 This screen shows the following parameters:

Reference Manual for the ProSafe VPN Firewall FVS318v3
7-2 Maintenance
January 2005
This screen shows the following parameters:
Table 7-1. FVS318v3 Status fields
Field Description
System Name The System Name assigned to the firewall.
Firmware Ve rsion The firewall firmware version.
WAN Port These parameters apply to the Internet (WAN) port of the firewall.
MAC Address The MAC address used by the Internet (WAN) port of the firewall.
IP Address The IP address used by the Internet (WAN) port of the firewall. If no address is
shown, the firewall cannot conn ect to the Internet.
IP Subnet Mask The IP Subnet Mask being used by the Internet (WAN) port of the firewall.
DHCP The protocol on the WAN port used to obtain the WAN IP address. This field can
show DHCP Client, Fixed IP, PPPoE, BPA or PPTP. For example, if set to Client,
the firewall is configured to obtain an IP address dynamically from the ISP.
LAN Port These parameters apply to the Local (WAN) port of the firewall.
MAC Address The MAC address used by the LAN port of the firewal l.
IP Address The IP address used by the Local (LAN) port of the firewall. The default is
192.168.0.1
IP Subnet Mask The IP Subnet Mask used by the Local (LAN) port of the firewall. The default is
255.255.255.0
DHCP Identifies if the firewall’s built-in DHCP server is active for the LAN attached
devices.