Reference Manual for the ProSafe VPN Firewall FVS318v3
E-32 VPN Configuration of NETGEAR FVS318v3
January 2005
c. Program the Scenario_1 connection screen as follows (see Figure E-23):
• Connection Security: Secure
• Remote Party Identity and Addressing: Select IP Subnet from the ID Type menu and
then enter 10.5.6.1 for Subnet, 255.255.255.0 for Mask, and leave All for Protocol.
(The Subnet and Mask parameters entered here must match the Start IP address and
Subnet Mask parameters of the Local IP Traffic Selector on the VPN Autopolicy
screen shown in Figure E-21 for the gateway router.)
• Enable Connect Using Secu re Gateway Tunnel; select Domain Name for ID_Type;
enter fvs_local for Domain Name; and enter 14.15.16.17 for Gateway IP Address.
(Domain Name must match the Local Identity Data parameter of the IKE Policy
Configuration screen shown in Figure E-21 for the gateway router. Also, Gateway
IP Address must match the WAN IP address of the gateway router shown in
Figure E-19.)
• Expand the Scenario_1 screen hierarchy by clicking the + sign in front of Scenario_1.
Then expand the rest of the screen hierarchies by clicking the rest of the + signs.
Figure E-23: Scenario_1 connection screen parameters