Reference Manual for the ProSafe VPN Firewall FVS318v3
5-28 Basic Virtual Private Networking
January 2005
a. Establish an Internet connection from the PC.
b. On the Windows taskbar, click the Start button, and then click Run.
c. Type ping -t 192.168.3.1 and then click OK.
Figure 5-34: Running a Ping test to the LAN from the PC
This will cause a continuous ping to be sent to the first FVS318v3. Within two minutes,
the ping response should change from “timed out” to “reply.”
Note: Use Ctrl-C to stop the pinging.
Figure 5-35: Ping test results
Once the connection is establish ed, yo u can op en the browser of the PC and enter the LAN IP
address of the remote FVS318v3. After a short wait, you should see the login screen of the
VPN Firewall (unless another PC already has the FVS318v3 management interface open).
•Gateway-to-Gateway Configuration—test the VPN tunnel by pinging the remote network
from a PC attached to the FVS318v3.
a. Open a command prompt (Start -> Run -> cmd).
b. Type ping 192.168.3.1.