20 Setting Up and Using Your Computer
www.dell.com | support.dell.com
Setting Up a Printer
NOTICE: Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
Obtain and install updated drivers
Connect the printer to the computer
Load paper and install the toner or ink cartridge
Contact the printer manufacturer for technical assistance

Printer Cable

Your printer connects to your computer with either a USB cable or a parallel cable. Your
printer may not come with a printer cable, so if you purchase a cable separately, ensure that
it is compatible with your printer. If you purchased a printer cable at the same time you
purchased your computer, the cable may arrive in the computer box.

Connecting a Parallel Printer

1Complete the operating system setup, if you have not already done so.
2Turn off the computer (see page30).
NOTICE: For best results, use a 3 m (10ft) or shorter parallel cable.
3Attach the parallel printer cable to the parallel connector on the computer and tighten
the two screws. Attach the cable to the connector on the printer and snap the two clips
into the two notches.