Dell 2350 manual Gently slide the drive into place

Models: 2350

1 136
Download 136 pages 29.32 Kb
Page 81
Image 81

NOTE: Some computers come with only two extra alignment screws; others come with four. You only need two alignment screws for this procedure.

10Gently slide the drive into place.

drive

securing screw

extra alignment screws (2 or 4)

alignment screws (2)

11Once the drive is in place, apply pressure to ensure that the drive is fully seated.

12Use the securing screw that came with the drive to attach the drive to the computer.

CAUTION: Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").

13Connect the power cable to the system board.

14Locate the data cable from the CD or DVD drive in the upper drive bay and connect its middle data connector to the new drive.

15Check all cable connections, and then fold the cables out of the way to provide airflow for the fan and cooling vents.

Adding Parts

81

Page 81
Image 81
Dell 2350 manual Gently slide the drive into place