NETGEAR FVS318v3 - page 229

Reference Manual for the ProSafe VPN Firewall FVS318v3
VPN Configuration of NETGEAR FVS318v3 E-35
January 2005
f. Verify the Authentication (Phase 1) and Key Exchange (Phase 1) Pr op osal 1 screen
parameters (see Figure E-26) match the IKE SA Parameters of the IKE Policy
Configuration screen shown in Figure E-21 for the gateway router.
Figure E-26: Scenario_1 Proposal 1 parameters for Authentication and Key Exchange
g. Save the Scenario_1 connection using Save under the File menu. You can also export the
connection parameters using Export Security Policy under the File menu.
You are new ready to activate the tunnel, but you must do it from the client endpoint (see
“Initiating and Checking the VPN Connections” on page 36). In the client-to-gateway scenario,
the gateway router will not know the client’s IP address until the client initiates the traffic.