NETGEAR GS748T manual Features

GS748T Smart Switch Hardware Installation Guide

Features

The following list identifies the key features of the NETGEAR GS748T Gigabit Smart Switch.

•Forty-eight 10/100/1000 Mbps auto-sensing Gigabit-Ethernet switching ports

•Four SFP GBIC combo Gigabit Ethernet slots for optional fiber connectivity

•Reset Button

•Factory Defaults Button

•Administrative switch management

•IEEE 802.1Q Tag VLAN with up to 48 VIDs ranging in 2 to 4K

•IEEE 802.1p QoS support, two priority queues per port

•Port-based VLAN with up to 48 groups; any one port can belong to different VLAN groups

•IEEE 802.3ad Link Aggregation support

•Embedded HTTP server for Web-based management

•Supports port-setting function, enabling user to enable/disable each port, and set speed, duplex mode and device flow control

•Auto-Discovery support with application program for discovering and managing the smart switches on the network

•Flash upgrade, configuration backup/restore, and factory reset

•Full compatibility with IEEE standards:

•IEEE 802.3i (10BASE-T)

•IEEE 802.3u (100BASE-TX)

•IEEE 802.3z/ab (1000BASE-X, 1000Base-T)

•IEEE 802.3x (full-duplex flow control)

•Auto-sense and auto-negotiate for all ports

•Auto Uplink on all ports for the right connection sense

•Integrated address Look-Up Engine supports 8K absolute MAC addresses

•Full- and half-duplex functions for all 10/100/1000 ports

•Store-and-Forward transmission to remove bad packets from the network

•Active flow control to minimize packet loss/frame drops:

•Half-duplex back-pressure control

Introduction 1-3

v1.0, January 2007