NETGEAR HDX101 - page 29

HDX101 Powerline HD Ethernet Adapter User Guide
Installing the Powerline HD Ethernet Adapter 2-15
v1.2, February 2007
To reset all the devices in your network to the factory defaults, proceed as follows:
1. For each remote device in your network, click the device name to highlight it.
a. Click the Factory Reset button. The software will display a message similar to the
following:
Note: Because only one device in a system can be reset at a time, the checkboxes are
not used to select devices for this type of operation.
Figure 2-19
Figure 2-20
Select remote
devices first
Select device by
highlighting the
device name, not
by setting a
checkmark