NETGEAR PS111W Invalid Configuration!

Invalid Configuration!

You CANNOTuse both the wired and wireless connections on the PS111W simultaneously if the

wireless LAN is in infrastructure mode. A valid setup connects and the Access Point to a hub or

switch. In this scenario, there is no need to insert an Wireless PC Card into the PS111W.

PS111W Printer Server

DS108 Hub

NETWORKPRINTER

12V DC

MA401 Card

Printer

Desktop PC

Notebook PC Notebook PC

ME102 Wireless

Contents

Main Technical Support Start Here Package Contents LEDs Wireless Ready Print Server Page Rear Panel Typical applications Wired LAN only Wired LAN (Infrastructure Mode) Wired LAN (Ad-hoc Mode) Wired and Ad-hoc Wireless LAN Invalid Configuration! Physical Installation 1. Position the Print Server 2. Connect the Printer Cable 3. Connect the Network Cable 4.Verify Operation Print Server Configuration Installing the Administration Tools and Setup Wizard Using the Setup Wizard Resetting the PS111W PC Setup Installing the Add Printer Wizard Running the Add Printer Wizard Troubleshooting Replacement Power Adapter Technical Specifications Warranty Information Certificate of the Manufacturer/Importer Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice EN 55 022 Statement Trademarks Statement of Conditions