NETGEAR PS111W Wired and Ad-hoc Wireless LAN

Wired and Ad-hoc Wireless LAN

Requires that a NETGEAR MA401 802.11b Wireless PC card be installed in the PS111W Print Server.

The Wireless LAN MUST use Ad-hoc mode in order to use both the wired and wireless

connections on the PS111W Print Server.

PS111W Printer Server

DS108 Hub

NETWORKPRINTER

12V DC

MA401 Card

Printer

Desktop PC

Notebook PC

Contents

Main Technical Support Start Here Package Contents LEDs Wireless Ready Print Server Page Rear Panel Typical applications Wired LAN only Wired LAN (Infrastructure Mode) Wired LAN (Ad-hoc Mode) Wired and Ad-hoc Wireless LAN Invalid Configuration! Physical Installation 1. Position the Print Server 2. Connect the Printer Cable 3. Connect the Network Cable 4.Verify Operation Print Server Configuration Installing the Administration Tools and Setup Wizard Using the Setup Wizard Resetting the PS111W PC Setup Installing the Add Printer Wizard Running the Add Printer Wizard Troubleshooting Replacement Power Adapter Technical Specifications Warranty Information Certificate of the Manufacturer/Importer Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice EN 55 022 Statement Trademarks Statement of Conditions