R6300v2 Smart WiFi Router
Advanced Wireless Settings
You can use this screen to turn the wireless radio on and off, to specify WPS settings, to use AP mode, and to set up a wireless access list.
The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen are reserved for wireless testing and advanced configuration only. Do not change these settings unless you have a specific reason to do so.
Control the Wireless Radio
By default, the wireless radio is enabled so that you can connect wirelessly to the router. You can turn the wireless radio on or off in the Advanced Wireless Settings screen or by using the WiFi On/Off button on the router side panel. When the wireless radio is off, you can still use an Ethernet cable for a LAN connection to the router.
To turn the wireless radio on or off:
1. Select ADVANCED > Advanced Setup > Wireless Settings.
By default, the Enable Wireless Router Radio check box is selected.
2.Select or clear the Enable Wireless Router Radio check box.
Clearing this check box turns off the WiFi feature of the wireless router.
3.(Optional) Select the Turn off wireless signal by schedule check box and fill in the fields to specify the times when you do not need a wireless connection.
For example, you could turn off the wireless signal for the weekend if you leave town.
4.Click the Apply button. Your changes take effect.
Advanced Settings
91
