USB Drive Requirements | NETGEAR R6300v2 guide

R6300v2 Smart WiFi Router

USB Drive Requirements

The router works with most USB-compliant external flash and hard drives. For the most up-to-date list of USB drives that the router supports, go to:

http://kbserver.netgear.com/readyshare

Note:Some USB external hard drives and flash drives require you to load the drivers onto the computer before the computer can access the USB device. Such USB devices do not work with the router.

The router supports the following file system types for full read/write access:

•FAT16, FAT32

•NTFS

•NTFS with compression format enabled

•Ext2, Ext3, Ext4

•XFS

•HFS

•HFS+

Note: HFS+ Journal is read only because Time Machine is not supported in this router. For more information about Time Machine, visit www.netgear.com/readyshare or see your Mac’s documentation.

Connect a USB Storage Device to the Router

ReadySHARE lets you access and share a USB drive connected the router USB port. If your USB device has special drivers, it is not compatible.

To connect a USB storage device:

1. Insert your USB storage device into the USB 3.0 port on the back of the router.

USB 3.0 port

USB Storage

49

Image 49

NETGEAR R6300v2 USB Drive Requirements, Connect a USB Storage Device to the Router,  To connect a USB storage device

Contents

R6300v2 Smart WiFi Router Compliance SupportTrademarks Contents USB Storage Administration Appendix a Supplemental Information Getting to know your router Hardware Setup Unpack Your Router Hardware Features Front and Side Panels WiFi On/Off button WPS button USB 2.0 port LEDs Label Rear Panel Position Your Router Getting Started Connecting to the router Login and Access Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp  To use Netgear genie to set up your router Netgear genie Setup Upgrade the Firmware Use Netgear genie after Installation To upgrade the firmware Basic Home screen with dashboard, language, and online help Dashboard Basic Home Screen Wi-Fi Protected Setup Method Join Your Wireless Network To use WPS to join the wireless network Manual Method Genie mobile app home screen Netgear genie App and Mobile genie App Your Internet connection and WiFi Netgear genie Basic Settings Internet Setup Internet Service Provider. PPPoE or PPPoA Internet Setup Screen FieldsInternet IP Address Parental Controls  To set up Live Parental Controls Netgear genie Basic Settings Click the Take me to the status screen button Basic Wireless Settings Netgear genie Basic Settings Wireless Security Options Wireless Settings Screen Fields Change the Wireless Security Option Set Up a Guest Network  To set up a guest network Select Basic Guest Network  To go to the Attached Devices screen View Attached Devices Netgear genie Advanced Home Specifying custom settings  To use the Setup Wizard Select Advanced Setup Wizard Internet Connection Setup WizardNetgear genie Advanced Home Screen WAN Setup Default DMZ Server Common MTU sizes Change the MTU Size  To change the MTU size Select Advanced Setup WAN Setup LAN Setup  To change the LAN settings Select Advanced Setup LAN Setup LAN Setup Screen Settings Use Router as Dhcp Server Role of the Router as a Dhcp Server Set Up Address Reservation WPS Wizard for WiFi Connections WMM QoS for Wireless Multimedia Applications Quality of Service QoS SetupPush Button  To disable WMM QoS Select Advanced Setup QoS Setup Set Up QoS for Internet Access Netgear genie Advanced Home Click the Add Priority Rule button QoS for a Router LAN Port Edit or Delete an Existing QoS Policy  To set the maximum uplink bandwidth Bandwidth Control  To enable Facebook WiFi Enable Facebook WiFiSelect the Enable Facebook Wi-Fi check box Netgear genie Advanced Home Facebook WiFi is enabled USB Storage Accessing and Configuring a USB Storage Connect a USB Storage Device to the Router USB Drive Requirements To connect a USB storage device Safely Remove a USB Drive Access the USB Storage Device To map the USB device to a Windows network drive  To access the USB drive with FTP from a remote computer  To access the USB drive from a remote computer Share Photos Share FilesStore Files in a Central Location for Printing  To share files with your friends and family Share Large Files over the Internet Back Up Windows Computers with ReadySHARE Vault To back up your Windows computer View a USB Device Attached to the Router Network Neighborhood/MacShare. Enabled by default USB Storage Device Network and Access Settings  To add a network folder Select Advanced ReadySHARE Available Network Folders  To edit a network folder Select Advanced ReadySHARE Click Create Network Folder Select the Allow only approved devices check box Specify Approved USB Devices Media Server Settings Use ReadyDLNA to Play Media from Your Network on TiVo TiVo Support To play videos On the TiVo, select TiVo Central My Shows  To copy TiVo Files onto a computer ReadySHARE Printer Setting up and managing a shared USB  To set up ReadySHARE Printer Set Up the ReadySHARE Printer UtilityReadySHARE Printer Utility  To install the Netgear USB Control Center Install the Netgear USB Control Center ReadySHARE Printer  To set up the Netgear USB Control Center Set Up the Netgear USB Control Center  To configure the Netgear USB Control Center Configure the Netgear USB Control Center Manage USB Print and Scan Jobs Select Tools Configuration ReadySHARE Printer  To launch the Netgear USB Control Center Launch the Netgear USB Control Center  To use the scan feature of a multifunction USB printer Use the Scan Feature of a Multifunction USB Printer Security Customizing the firewall settings  To delete a keyword or domain Keyword Blocking of Http TrafficClick Delete Keyword  To specify a trusted computer Block Services Port Filtering Defined Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers Click the Add Custom Service button Add a Custom Service Click Edit Service or Delete Service Set Up Port TriggeringEdit or Delete a Port Forwarding Entry Application Example Make a Local Web Server Public Clear the Disable Port Triggering check box Security  To schedule blocking Select Advanced Security Schedule Schedule Blocking Set Up Security Event Email Notifications Your settings are saved Managing your network Administration Upgrade the Router Firmware Router Information View Router StatusInternet Port Hardware Version. The router model Show Statistics Button Connection Status Button Wireless Settings 2.4 GHz and 5 GHz  To view logs Select Advanced Administration Logs View Logs of Web Access or Attempted Web Access Back Up Settings Manage the Configuration FileRestore Configuration Settings Do not interrupt the reboot process Erase the Current Configuration Settings Change the Password  To recover your password Password Recovery Setting up unique situations Advanced Settings Control the Wireless Radio Advanced Wireless Settings View or Change WPS Settings Set Up a Wireless Schedule To configure and enable the wireless schedule Set Up a Wireless Access List by MAC Address Select the Turn Access Control On check box Wireless Access Point AP Select Advanced Wireless AP  To set up the router as an AP  To set up bridge mode Set Up the Router in Bridge Mode Click the setup bridge mode wireless settings button Dynamic DNS Set Up a New Dynamic DNS Account  To set up Dynamic DNS if you already have an account Service Provider list, select NetgearSpecify a DNS Account That You Already Have NoIP.com Netgear  To change your settings Change the Dynamic DNS SettingsSelect Advanced Advanced Setup Dynamic DNS Static Routes  To edit or delete a static route  To set up a static route Remote Management  To turn on Universal Plug and Play Universal Plug and Play IPv6 Auto Detect Requirements for Entering IPv6 Addresses IPv6 Auto Config IPv6 6to4 Tunnel Advanced Settings 114  To set up a fixed IPv6 Internet connection  To set up a pass-through IPv6 Internet connectionIPv6 Pass Through IPv6 Fixed IPv6 Dhcp  To set up an IPv6 Internet connection with a Dhcp server IPv6 PPPoE  To set up a PPPoE IPv6 Internet connection Advanced Settings 118 Traffic Meter Advanced Settings 120 Troubleshooting Network Settings Wireless SettingsQuick Tips Troubleshoot with the LEDs Power LED Stays Amber Power LED Is Off or BlinkingLEDs Never Turn Off Internet LEDs Is Off Cannot Log In to the Router WiFi LED Is Off Cannot Access the Internet Troubleshooting 126 Troubleshoot Internet Browsing Troubleshoot PPPoE Changes Not Saved Wireless Connectivity Test the LAN Path to Your Router Troubleshoot Your Network Using the Ping Utility To ping the router from a Windows computer Test the Path from Your Computer to a Remote Device Supplemental Information Factory default settings Factory Settings Supplemental Information 133 R6300v2 Router specifications Technical Specifications Supplemental Information 135