Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302

WG511 802.11g 54 Mbps Wireless CardBus Adapter

WG111 801.11g 54 Mbps Wireless Bridge

System Requirements

Before installing the WAG302, make sure your system meets these requirements:

A 10/100 Mbps Local Area Network device such as a hub or switch

The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the package, or one like it

A 100-240 V, 50-60 HZ AC power source

A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator 4.78 or above

At least one computer with the TCP/IP protocol installed

802.11b or 802.11b-compliant devices, such as the NETGEAR WG511 Wireless Adapter

What’s In the Box?

The product package should contain the following items:

WAG302 ProSafe Dual Band Wireless Access Point

Power adapter and cord (12 V dc, 1.2 A)

Straight through Category 5 Ethernet cable

WAG302 ProSafe Dual Band Wireless Access Point Installation Guide (201-10421-01)

Resource CD for the NETGEAR WAG302 ProSafe Daul Band Wireless Access Point (240-10172-01) which includes this manual.

Support Registration card

Contact your reseller or customer support in your area if there are any missing or damaged parts. You can refer to the Support Information Card for the telephone number of customer support in your area. You should keep the Support Information card, along with the original packing materials, and use the packing materials to repack the WAG302 if you need to return it for repair. To qualify for product updates and product warranty registrations, we encourage you to register on the NETGEAR Web site at: http://www.NETGEAR.com.

Introduction

2-5

202-10078-01

Page 19
Image 19
NETGEAR WAG302 manual System Requirements, What’s In the Box?