Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302

How to Configure WPA-PSK

Note: Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings.

To configure WPA-PSK, follow these steps:

1.Log in at the default LAN address of http://192.168.0.230 with the default user name of admin and default password of password, or using whatever LAN address and password you have set up.

2.Click the WEP/WPA Settings link in the main menu of the WAG302.

WEP/WPA Settings 11a menu

WEP/WPA Settings 11b/g menu

 

 

 

 

 

 

 

 

 

 

 

 

Figure 3-15: WEP/WPA Settings menus for 11a and 11bg

3.Choose WPA-PSKfrom the list.

4.Enter the pre-shared key passphrase.

5.Click Apply to save your settings.

Basic Installation and Configuration

3-29

202-10078-01

Page 51
Image 51
NETGEAR WAG302 manual How to Configure WPA-PSK, 15 WEP/WPA Settings menus for 11a and 11bg