Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
Figure 5-1: Advanced IP Settings for Wireless Clients screen
You may configure the Advanced IP Settings for Wireless Clients if you are a network system administrator.
•Use AP as DHCP Server: You may turn on this option and the Access Point will function as a DHCP Server for Wireless Clients only. The Access Point will provide the
There are two options available for managing the wireless clients:
–Accept DHCP Enabled Wireless Clients Only: The Access Point can only provide the TCP/IP configurations to those wireless clients with the DHCP enabled.
–Accept Both DHCP Enabled and Static IP Configured Wireless Clients: The Access Point will support wireless clients with the DHCP enabled and the static IP configured.
You need to configure the following TCP/IP configurations for using Access Point as a DHCP Server for Wireless Clients.
–Starting IP Address: Type the starting IP address can be assigned from the DHCP server on this Access Point.
–Ending IP Address: Type the Ending IP address can be assigned from the DHCP server on this Access Point
Advanced Configuration |
