Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
Hardware Description
Front Panel
The WAG302 front and rear hardware functions are described below.
Figure 2-1: WAG302 front panel
The following table explains the LED indicators:
LED | DESCRIPTION |
|
|
PWR | Power Indicator |
|
|
Off | No power. |
|
|
On | Power is on. |
|
|
TEST | Self Test Indicator |
|
|
Blink | Indicates self test, loading software, or system fault (if continues). |
| Note: This LED may blink for a minute before going off. |
100 | Ethernet LAN Speed Indicator |
|
|
Off | Indicates 10 Mbps Ethernet link detected |
|
|
Green On | 100 Mbps Fast Ethernet link detected. |
|
|
Introduction |
