User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2
You may need to reboot in certain Windows operating systems such as Windows 98SE.
Note: If you cannot connect, see “Removing the WG511v2 Software” on page 
Also, for problems with accessing network resources, the Windows Client and
File and Print Sharing software might not be installed and configured properly on your computers. Please see the link to “Internet Networking and TCP/IP Addressing:” on page
Starting a Computer-to-Computer (Ad Hoc) Network Connection
1.On the Settings tab page of the Smart Wizard, select or type the Network Name (SSID).
2.Select the
3.Click Initiate Ad Hoc. The Ad Hoc Setting dialog box opens:
Figure
4.In the Start Ad Hoc field, choose the wireless standard (802.11a, 802.11b, or 802.11g) for your Ad Hoc
5.In the Channel field, Automatic should work. If you notice interference problems with another nearby wireless device, select a channel that is not being used by any other wireless networks near your wireless adapter. Use the Networks tab page to identify the channels in use in your area.
6.Click OK.
Note: The channel number differs depending on the country. The connection speed automatically defaults to the highest speed.
Network Connections and Wireless Security |
