User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2
Setting up a Profile to Connect to an Access Point or Router
Follow these instructions to set up the NETGEAR 54 Mbps Wireless PC Card WG511v2 to connect to a wireless access point or router.
1. Use the 
icon to open the Smart Wizard. The Settings page opens.
Figure
2.Enter the network settings.
a.In the Network Type section, be sure that Access Point (Infrastructure) is selected.
b.In the Profile box, type the name of the profile.
c.In the Network Name (SSID) field select a network or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID matches exactly the SSID used by the access point.
3.Save your settings in a Profile.
a.Click the Save Profile button.
All the configuration settings are saved in this profile.
b.Click Apply.
Network Connections and Wireless Security |
