NETGEAR WG511v2 user manual V2.2, December

User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2

b. Use the icon to open the Smart Wizard. The Settings tab page opens.

Figure 4-9

2.Configure the Security settings.

a.In the Profile box, select the profile or type in a profile name.

b.In the Network Name (SSID) field select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.

c.In the Security section, select WPA2-PSK [AES].

For more information about WPA2-PSK security, see the Web link to “Wireless Communications:” on page B-1.

3.Save your settings in a Profile.

a.Click the Save Profile button. All the configuration settings are saved in this profile.

b.Click Apply.

c.Click Close to exit the Smart Wizard.

Network Connections and Wireless Security 4-13

v2.2, December 2005