3.Click Next. The WNA3100 v1 software detects the adapter. Follow the onscreen prompts to install the driver.
4.Follow the prompts to complete the installation.
How you connect to a network depends on what you selected during custom installation.
•For automatic configuration, see the following section, “Use Smart Wizard Automatic Configuration to Connect to a Wireless Network.”
•If you selected manual configuration, the Settings tab displays. See “Joining a Network” on page
•To use a Windows utility, see your Windows documentation or the NETGEAR application note at http://documentation.netgear.com/reference/enu/winzerocfg/index.htm.
Use Smart Wizard Automatic Configuration to Connect to a Wireless Network
After the driver is installed, you are prompted to connect to a wireless network.
1.One of the following screens displays:
No |
Figure
•If no WPS networks are in your area, select your wireless network from the list and click Next. If you select a secured network, you need to enter the passphrase or network key.
