Appendix A | SHELL Commands |
BOTH
show memory [all]
Displays memory usage information for your Cayman Gateway. If you include the optional all argument, your Cayman Gateway will display a more detailed set of memory statistics.
ENET
show ppp [{ stats lcp ipcp lastconnect }]
Displays information about open PPP links. You can display a subset of the PPP statistics by including an optional stats, lcp, ipcp, or lastconnect argu- ment for the show ppp command.
DSL
show ppp [{ stats lcp ipcp lastconnect }] [vccn]
Displays information about open PPP links. You can display a subset of the PPP statistics by including an optional stats, lcp, ipcp, or lastconnect argu- ment for the show ppp command. The optional vccn argument lets you
specify the virtual circuit for which you want statistics.
BOTH
show pppoe
| Displays status information for each PPP socket, such as the socket state, service |
| names, and host ID values. |
|
|
BOTH | show |
| Displays up to 100 |
|
|
BOTH | show status |
| Displays the current status of a Cayman Gateway, the device's hardware and soft- |
| ware revision levels, a summary of errors encountered, and the length of time the |
| Cayman Gateway has been running since it was last restarted. Identical to the |
| status command. |
BOTH
show wan-users [all]
Without the all parameter displays the number of concurrent WAN Users and the total number allowed. With the all parameter specified, displays information about each connected WAN User, including its IP address and idle time before automatic disconnect. This function is only available if the number of WAN Users is restricted and NAT is on.
BOTH
show wireless
Displays status and statistics information for the wireless interface on the Gate- way.
ENET
start ppp
Opens a PPP link (typically PPP over Ethernet).
115