Netopia 6.3 manual Platform Convention, Arp nnn.nnn.nnn.nnn, Atmping Vpi vci segment end-to-end

Appendix A SHELL Commands

The only command you cannot truncate is restart. To prevent accidental inter- ruption of communications, you must enter the restart command in its entirety.

You can use the Up and Down arrow keys to scroll backward and forward through recent commands you have entered. Alternatively, you can use the !! command to repeat the last command you entered.

Platform Convention

For each Shell and Config command, an “Index Tab” shows which platform(s) the command supports. For example

BOTH

arp nnn.nnn.nnn.nnn

Both the Cayman 3220-H and 2E-H platforms use this command.

DSL

atmping vpi vci [ segment end-to-end ]

The Cayman 3220-H platform uses this command.

ENET

reset ppp [enet-B]

The Cayman 2E-H platform uses this command.

SHELL Commands

BOTH

arp nnn.nnn.nnn.nnn

Sends an Address Resolution Protocol (ARP) request to match the

nnn.nnn.nnn.nnnIP address to an Ethernet hardware address.

DSL

atmping vpi vci [ segment end-to-end ]

Lets you check the ATM connection reachability and network connectivity. This command sends five Operations, Administration, and Maintenance (OAM) loop- back calls to the specified vpi/vci destination. There is a five second total timeout interval.

Use the segment argument to ping a neighbor switch.

Use the end-to-endargument to ping a remote end node

BOTH

clear [yes]

Clears the configuration settings in a Cayman Gateway. If you do not use the optional yes qualifier, you are prompted to confirm the clear command.

108