Appendix A | About CONFIG Commands |
Dogzilla (top)>> set system
Stepping set mode (press
...
system
name (“Dogzilla”): Mycroft
Diagnostic Level (High): medium Stepping mode ended.
Validating Your Configuration
You can use the validate CONFIG command to make sure that your configura- tion settings have been entered correctly. If you use the validate command, the Cayman Gateway verifies that all required settings for all services are present and that settings are consistent.
Dogzilla (top)>> validate
Error: Subnet mask is incorrect
Global Validation did not pass inspection!
You can use the validate command to verify your configuration settings at any time. Your Cayman Gateway automatically validates your configuration any time you save a modified configuration.
120