Neuton CE 6.2 manual Assembling Your NEUTON Mower

Assembling Your NEUTON Mower

To allow you to quickly begin using your NEUTON Mower, it shipped to you partially assembled. The assembly process is easy and does not require any special tools, knowledge, or strength.

Assembling your NEUTON Mower takes just a few steps:

Step 1: Read the Safety & Operating Instructions before proceeding

Step 2: Adjust the Handlebar Height

Step 3: Remove the Battery

Step 4: Charge the Battery before your first use

Step 5: Attach the Side Discharge Chute, Mulching Plug, or Rear Bagger

Step 6: Insert the Battery after it is fully charged

Each of these steps is described in detail below: (See Figure 15 on page 17 for a photograph of the fully assembled Mower)

THE SAFETY KEY, WITH ITS BUILT-IN CIRCUIT BREAKER, AS WELL AS THE BATTERY, SHOULD NEVER BE INSERTED DURING ASSEMBLY, ADJUSTMENTS, CLEANING, BLADE REPLACEMENT, OR WHEN THE MOWER IS NOT IN USE. REMOVING THE SAFETY KEY WILL PREVENT ACCIDENTAL STARTING, AND HELP AVOID SERIOUS PERSONAL INJURY.

Step 1: Read the Safety & Operating Instructions before proceeding.

The NEUTON Mower is a motorized cutting machine that uses a sharp Blade. For your safety, and for best results, it is important to read the information in “Chapter 2: Important Safety Considerations” before you assemble or use the Mower.

To familiarize yourself with the assembly, features, and operation of your Mower, please read the remainder of this manual before proceeding.

NOTE: Do not discard the shipping box and packaging material until you are fully satisfied with your new NEUTON Battery-Powered Mower.

NEUTON CE 6.2 Battery-Powered Mower - Safety & Operating Instructions 11