Neuton CE 6.2 manual Tip Tip, Adjust the Handlebar Height, Remove the Battery

Step 2: Adjust the Handlebar Height

TIP To keep the Mower from moving while you adjust the Handlebar, place your foot behind one of the wheels.

1.Push down on the Handlebar Adjust Lever (Figure 2) and fold the Handlebar up to a comfortable position for you, and then release the Lever. You can choose any of four (4) positions.

TIP

TIP

Handlebar Adjust Lever

Figure 2

Step 3: Remove the Battery

You can quickly and easily remove the Battery from your Mower.

1.Push the Release Button back and open the Access Cover (Figure 3). Push the Release Button back with one hand and open the Cover with the other.

2.Twist the Battery Retainer Arm either way until it is no longer blocking the Battery (Figure 4).

To help keep the Mower from rolling while removing the Battery, put one foot behind a wheel for stability.

3. Pull the Battery straight up and remove it. Battery Retainer Arm

Access Cover

Release Button

Figure 3 Figure 4

Step 4: Charge the Battery before Your First Use

You MUST charge the Battery for eight (8) to twenty-four (24) hours before you use the Mower for the first time. If you do not charge it before using the Mower, the Battery’s charging capacity may decrease.

For instructions on removing and charging the Battery, read “Chapter 5: Charging and Caring for the Battery” before you operate the Mower.

12 1-866-NEUTON1 (638-8661) www.neutonpower.com