computer
handlebar
pulse sensors
wire
wire
connectors
phillips bolts | computer | |
tube | ||
|
STEP 6 – Computer Assembly
a)Remove the four Phillips Bolts from the back of the Computer.
b)Snap together Wire Connectors for Computer, tucking the Wires inside the Computer Tube.
Be careful not to pinch the wires.
c)Attach the Computer using the four Phillips Bolts you removed in step (a). Tighten with the Phillips Screwdriver provided.
d)Remove Battery Door on the back of the Computer.
Insert four “C” Batteries (included) in numbered order and replace Battery Door.
e)Plug the Wire from the Handlebar Pulse Sensors into the back of the Computer.
STEP 7 – Foot Pedal Assembly
The Foot Pedals and the Foot Pedal Cranks are marked “L” and “R”.
Using the Wrench provided, attach the Left Foot Pedal to the Left Crank rotating the Wrench
You will strip the threads.
Attach the Right Foot Pedal to the Right Crank rotating the Wrench clockwise.
right foot
pedal
left 
foot pedal
left side shown looking from the back of the unit
left
crank
“L” & “R” markings are shown on the
ends of the pedal shafts
crank
left foot
pedal
STEP 8 – AC Adapter
Insert AC Adapter into front of Unit, then plug into wall.
8
Assembly is now complete.
IMPORTANT:
Please read pages
before beginning your workout
for important instructions
on how to use your
New Balance 5100 Upright Bike.
