STEP 1 – Foot Tube Assembly
a)Align the Rear Foot Tube with Levelers with the rear of the Main Frame Assembly. Make sure the square holes in the Rear Foot Tube are on the outside. Insert Carriage Bolts from fastener pack through the Rear Foot Tube with Levelers and Main Frame Assembly. Secure with Curved Washers and Nuts also from the fastener pack. Tighten with the Wrench provided.
b)Repeat on the front of the unit using the Front Foot Tube with Wheels. Make sure wheels are facing forward (away from the unit) during assembly.
main frame
assembly
wheel
front
foot
tube
1b
carriage bolt
leveler
rear foot tube
acorn nut
washer1a
carriage bolt
STEP 2 – Computer Tube Assembly
a)Attach the Wire Connector from the Main Frame Assembly to the Wire Connector coming out the bottom of the Computer Tube. Computer Tube should angle down towards the front of the unit as shown.
b)Insert the Computer Tube into the front of the Main Frame Assembly tucking the wires down into the Main Frame Assembly.
Be careful not to pinch the wires. Gently pull the wires up from the top of the Computer Tube to prevent any slack in the wires at the base of the Computer Tube.
c)Secure the Computer Tube in place with the four allen bolts and washers from the fastener pack. Tighten with the Allen Wrench provided.
computer
tube
wire
connector
allen bolt
washer
main frame
assembly
6
