Nextbook NEXT7P12 instruction manual Charging Battery, Transferring Files, Turning On the Unit

Charging Battery

The device has a built-in rechargeable battery. No extra battery installation is required. Just charge the device when it indicates low battery.

To charge the battery, connect the device to any standard wall outlet via the DC-IN port using the power adaptor. It takes about 5 hours to fully charge the battery. When the battery is fully charged, the charge indicator should light up in orange. During charging, the indicator lights up in red.

Note:

a.You are strongly recommended to charge the battery immediately when the device indicates the battery is lower than 15%!

b.You can operate the device even when it is being charged. But for extended battery life, it is suggested NOT to use the device when it is charging.

c.It is recommended to charge the battery before you use the device for the first time.

d.For maximum performance, lithium-ion batteries need to be used often. If you don’t use the device often, be sure to recharge the battery at least once per month.

e.Be sure to use only the dedicated power adaptor provided with the unit for charging.

Transferring Files

Before reading or playing files, you need to transfer media files from a computer to the device.

(1)Connect the device to a computer with the supplied USB cable.

(2)Tap “Turn on USB storage” to connect the device to computer.

(3)Once connected, two removable disk drives will show on your computer. One represents the internal memory of the device, and the other represents the memory card inserted into the device. Now you can copy files from or to these disk drives just as you would on your hard drive.

(4)As you complete file transfer, choose “Turn off USB storage” to disconnect the device.

(5)Remove the device from the computer safely.

The pre-installed applications and Android OS occupy a considerable part of capacity – nearly more than 1GB, it is normal that you see huge difference between available memory space and total capacity.

Turning On the Unit

To turn on the device, press and hold the Power button on the unit until you see the boot-up screen. It may take a few minutes to start up the system, please wait before you proceed.

A Startup Wizard should start when the unit turns on. Please follow the wizard to set the district where you are – USA or Canada.

6