Nikon 2174 user manual Mounting lens, mm Be careful not to soil or damage the CPU contacts

Important!

• This lens is a manual focus lens, and autofocus is not possible
even when the camera's focus mode is set to AF mode.
• Rotating the focus ring enables the effective aperture to be	En
displayed in the LCD panel and viewfinder of the camera body.

•Use of tilt/shift function can cause some vignetting or slight color change. (Vignetting is the darkening of the corners around the image.)

•When mounted on Nikon digital SLR (Nikon DX format) cameras, such as the D2-Series and D300, the lens’ picture angle becomes 34°50’ and its 35 mm equivalent focal length is approx.

67.5 mm.

•Be careful not to soil or damage the CPU contacts.

•If the lens mount rubber gasket is damaged, be sure to visit your nearest Nikon authorized dealer or service center for repair.

•In low temperatures, new or fully charged batteries should be used in the camera.

4. Mounting lens

aSet the shift amount and tilt amount to 0 by rotating the shift and tilt knobs. (Fig. 2)

Note: Avoid attaching/detaching the lens to/from the camera while using tilt, shift and/or revolving, and without locking each knob. Failure to do so can lead to you pinching your fingers between the lens and the camera body.

Fig. 2

bSet the tilt and shift knobs. (Fig. 3)

Note: Turning either knob too tightly may damage the knob.

Fig. 3

23