Waterproofing

The following are important notes about the camera's waterproofing. Before using the camera, please thoroughly read the information in “<Important> Shockproof, Waterproof, Dustproof, Condensation” (Axii).

Waterproofing-related Messages

The camera will display messages related to its waterproof capabilities when you select certain settings or perform certain operations. Read and follow the information displayed in the messages when they are displayed.

Do not open the covers by the water or in sandy locations, as foreign matter could enter the camera.

Remove any foreign matter with a brush or blower.

1/6

2/6

Confirm that no foreign matter is present where shown, then close the covers.

3/6

To remove foreign matter after use, immerse in fresh water for about 10 minutes.

4/6

Next, wipe off any water droplets and place on a cloth to dry.

5/6

After drying thoroughly, use a cloth to remove any droplets remaining on the areas indicated.

6/6 Exit

Waterproofing-related messages are displayed in the following situations.

•When turning on and setting the camera for the first time

•When setting the camera to Underwater (A41)

•When turning the camera on after charging

Warning: If the cover is closed without removing foreign particles, water may seep inside the camera or the camera may become damaged.

Make sure to check and clean the camera.