Using Macro Mode

Use macro mode when taking close-up images.

1 Press the multi selector I(p).

2 Select oand press the k

 

Macro mode

button.

 

•If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled.

3 Move the zoom control to set the zoom ratio to a position where F 40

and the zoom indicator glow green.

•When the zoom ratio is set to a position where the zoom indicator glows green, the camera can focus on subjects as close as approximately 10 cm

(4 in.) from the lens.

At the wide-angle zoom position from G, the camera can focus on subjects as close as approximately 1 cm (0.4 in.) from the lens.

B Notes About Using the Flash

The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).

C The Macro Mode Setting

•The setting may not be available with some shooting modes.

•The setting applied in A(auto) mode is saved in the camera’s memory even after the camera is turned off.

Features Shooting

51