Nikon Information), Create Log (Record the Log of Movement, Start all logs, Start depth log, Start location log

Create Log (Record the Log of MovementInformation)

Press the dbutton Mz(location data options) menu icon MCreate log Mkbutton

When log recording starts, the measured movement information is recorded until a preset time has elapsed at the interval set for Log interval.

•The recorded log data cannot be used by itself. To use the data, end log recording and save it to a memory card.

1 Use the multi selector HIto select a log to be recorded, and press the kbutton.

•Select a log to be recorded from the

following logs.

- Start all logs: The location data, altitude and water depth information log data is recorded.

-Start location log: The location data log data is recorded.

-Start depth log: The water depth information log data is recorded.

2 Select the log interval that will be
	Log interval
used for recording a log, and press	15 s
	30 s
the kbutton.	1 min
• The intervals that can be set for recording a	3 min
log vary depending on the log to be	5 min
recorded.	10 min
		Section Reference

E83