Nikon Embed POI, Record location data, B Battery Drain While Recording Location Data and Log Recording

Location name information

(POI information)

Maps Functions/Displaying Data Location Using

B Battery Drain While Recording Location Data and Log Recording

•When Record location data is set to On, record location data functions will continue to operate at the specified interval for approximately 6 hours even after the camera is turned off. Also, record location data functions and log recording will continue to operate while recording logs (A88) even after the camera is turned off.

•When Record location data is set to On or while recording logs, the battery power will drain faster than usual. Confirm the battery level especially when recording a log using Start all logs or Start depth log.

C Location Data Reception Indicator and Points of Interest (POI) Information

• Location data reception can be checked on the shooting screen.

-n: Signals are being received from four or
more satellites and positioning is being	40
	30
performed. The location data is recorded on
	20
the image.	10
-o: Signals are being received from three	0	15m
	-10
satellites and positioning is being performed.		1010hPa
		25m 0s
The location data is recorded on the image.
		880
-z: Signals are being received from the	Location data reception
satellites, but positioning is not possible. The

location data is not recorded on the image.

-y: Signals cannot be received from the satellites, and positioning is not possible. The location data is not recorded on the image.

•POI information is location name information for the nearest landmarks (facilities) and other details.

-When Display POI in Points of interest (POI) of the Location data options menu (A87) is set to On, the nearest location name information for the current position is displayed during shooting.

-When Embed POI is set to On, location name information can be recorded on the image during shooting.

-If the location name information was recorded on the image during shooting, this information is displayed when Display POI is set to On during playback.

•The location name information may not be displayed depending on the setting level in Level of detail of Points of interest (POI). Also, certain landmark names may not be registered, or the landmark name may be different.

80