Open the battery chamber cap by

3lifting it up.

-The cover may be hard to open if the O·ring isn 't properly lubricated. In this case, the O-ring should be relubricated. (See page 12.)

4 Load the battery.

Insert the NiCd battery unit SN-104 into the battery chamber securely, aligning the battery positioning notch with the battery lock release lever (orange).

-Slide the battery lock release lever (orange) in the direction of the arrow ( ~ ) to remove the battery.

5Raise the buckle.

-Hold down the battery chamber cap and engage the buckle hook to raise the buckle.

6Lock the releasellock buckle.

-Slide the buckle lock and press the release/lock buckle to the Speedlight.

-Check to be sure there is no gap between the battery chamber cap and the Speedlight. The buckle should be securely locked.

+Note

Standby switch

The SB-104 is provided with a standby switch to conserve battery power. Refer to page 37 for details on the standby switch.

16

Page 16
Image 16
Nikon 58-104 manual Open the battery chamber cap by 3lifting it up, 5Raise the buckle, 6Lock the releasellock buckle